Yangzhou Maoyuan Environmental Protection Technology Co., Ltd
Source: Yangzhou Maoyuan Environmental Protection Technology Co., Ltd
China-18.6.14 -- Working Principle: When the sludge is thickened by gravity, the sludge is transported to the dehydrating section. In the process of advancing, with the gradual smaller of the seam and pitch, and the obstruction of the back pressure plate, the internal pressure is produced and the volume is reduced continuously to achieve the purpose of full dehydration. Screw Press sludge dewatering machine, screw laying machine sludge treatment process, screw type sludge dewatering machine, Screw Press sludge treatment process flow sheet. 1. Through flocculation experiments, determine the type and proportion of matching flocculants. If two flocculants are needed for effective flocculation, it is recommended to select a dewatering machine with two flocculation tanks. The mixing device should be set up in the sludge tank. The dewatering machine should continuously mix the sludge before and during the operation, so as to ensure the relative stability of the sludge concentration. 2. Before running the MDS411 superscrew type sludge dewatering machine, the flocculant solution should be first prepared with the foaming device. Among them, the normal dilution ratio of polymer flocculant is 500-1000 times. The sludge is transported through the sludge pump, and the flocculant is pumped through the dosing pump. The flocculant is added to the flocculation mixing tank according to the corresponding proportion. The mixture is fully mixed to form the alum flower through the mixer, and the gravity concentration is carried out in the concentrating section. The filtrate is discharged from the filter seam of the concentrated part. The filtrate has a low solid content and is directly reflued to the original pool. 3. The concentrated sludge moves forward along the helix axis, and fully dehydrates in the dehydrated part under the action of various resultant forces. The filtrate of the dehydrating part has high solids content and can be reflued to the flocculation tank for dehydration. 4. After dewatering, the mud cake is discharged from the outlet of the mud cake outlet, and is transported to the mud truck directly or through the shaft-less screw conveyor for reuse.
Flottweg Separation Technology will Highlight the Xelletor at WEFTEC 2022
Flottweg designs and manufactures X Series or Xelletor with the intent to change the way you look at centrifuge separation. This cutting-edge equipment will be discussed at the Flottweg Booth #2745 at WEFTEC 2022, October 10-12, 2022, in New Orleans, Louisiana, USA. Flottweg is continuously advancing centrifuge technology for water treatment with solutions such as the double cone scroll, centrate energy recovery systems (recuvane) and most recently our new open scroll design, Xelletor, that allows for more...
Order BMP Dewatering Bag Online
BMP Supplies has listed all of it's stocked Dewatering Bags online - click HERE to review and to place an order.BMP Dewatering Bag is used in applications where sediment laden water is being pumped. The pump hose outflow is attached into the Dewatering Bag opening. The water that escapes the bag will be filtered to the specification of the bag material. Sizes2.5'x6', 5'x6', 5'x10', 5'x15' Custom Sizes Available.Grab TensileASTM D-4632: 912 N (205 lbs) PermittivityASTM D-4491: 1.5 secAdditionalEach bag is...
Hydroman™ Submersible Sewage Water Pump also can called submersible sewage pump, submersible effluent pump, submersible drainage pump, submersible wastewater pump, submersible trash pump etc., Hydroman stock a large range of submersible water pumps for any dewatering including soft solids up to 2" in diameter application, such as such as raw water transfer in purifying tanks (Johkasou/septic tanks), wastewater treatment facilities, pumping stations and flood prevention equipment, and reservoirs of recreationa...
Ed Fritz Named Chair of WEF Solids Separation Subcommittee at Residuals and Biosolids Conference
Operators Unlimited is proud to announce that Ed Fritz, Wastewater Process Engineer and Project Manager, transitioned from Vice Chair to Chair of the Solids Separation Subcommittee at the WEF Residuals and Biosolids Conference in May 2022. He will serve as Chair from 2022-2024.
Salher launches new product range: pressure filters
For this reason, Salher now presents its pressure filters with customised design for all types of application. Salher’s product catalogue includes water treatment equipment, such as screening systems, dissolved air flotators or membrane bioreactors; water reuse and drinking water treatment systems; hydrocarbon separators; pumping stations and sludge dewatering systems. The new pressure filters included in this catalogue are high-performance vertical industrial filters, high-capacity horizontal industrial...
No comments were found for Process description of Screw Press Sludge Dewatering Machine. Be the first to comment!
Environmental XPRT is a global environmental industry marketplace and information resource. Online product catalogs, news, articles, events, publications & more.
Environmental XPRT is part of XPRT Media All Rights Reserved. Terms Privacy
Our sites: Agriculture XPRT Energy XPRT Medical XPRT XPRT